Water Sampling with the IMD-W System: One Method, Many Applications Purified water has many uses throughout the biologics, pharmaceutical, and medical device industries – from cleaning equipment after manufacturing, to heating and cooling for sterilization and sanitization, to providing the base constituent of life-sustaining therapies. Because of the many uses for highly purified water, there are many ways to use the IMD-W system, an instantaneous microbial detection system for pharmaceutical grade waters. Flexibility to Meet All of Your Application Needs: On-line, At-line, and In Laboratory The IMD-W system has been designed specifically with flexibility of use in mind. The system may be used in a laboratory setting for the testing of individual samples, and also can be placed online for continuous monitoring.
Filling Line Cleaning / Clean-In-Place (CIP) Typically, the filling line conveyor belt and other ancillary equipment are considered product contact surfaces for the purposes of pharmaceutical, biologic, and medical device manufacturing and, for that reason, need to be as clean as the product itself. Residual API or sugars, for instance, may harbor microbial growth which could compromise sterility in the cleanroom. Therefore, water used for cleaning filling lines, conveyor belts, and other machinery should be rinsed down to bulk purified water levels with zero chemical residuals. The IMD-W system can facilitate the process by determining the water’s microbial count prior to these cleaning processes, either by assessing grab samples from the clean water line, or for CIP processes, through direct online connection.
Pretreatment and Reverse Osmosis (RO) Effectiveness Sampling of the purified water generation process, near or at the end of the pretreatment, is performed to confirm water quality inputs into Water-for-Injection (WFI) or Purified Water (PW) generation systems. Here, the IMD-W system can be used to monitor continuously the post-RO filtered water, much as online conductivity and TOC instruments are used. When combined, these data will help paint a picture of the pretreatment water generation process, support the development of schedules for critical system cleaning and sanitization, and lead to a better understanding of the microbial nature of that process throughout water production.
Storage Tank Sampling Water within storage tanks usually is re-circulated to reduce the chances of microbial adhesion and biofilm formation. Even in these closed systems, changes may occur in not just the microbial quality of the water, but also in the integrity of redundant filters and gaskets. An IMD-W system can be very useful in monitoring these loops on a continuous basis to assure that microbial levels are low or to maintain a constant baseline. Potential contamination from gasket and filter changeouts may be monitored in real time, and the resulting data used to support the decision to bring a water generation system back into production. Finally, continuous monitoring of recirculating storage tanks allows for greater understanding of microbial proliferation in the system being monitored, if any exists. These data can provide a concrete rationale to justify water hold-time recommendations.
Point-of-Use Sampling Sampling with an IMD-W system at the end of the WFI loop, prior to the redundant filtration, will confirm the overall fitness of the process, as well as quantify the system bioburden prior to point-of-use filtration. When IMD-W sampling is performed as part of an overall sampling plan, the data that is generated can provide an insightful snapshot into the prefiltration bioburden of a purified water generation process. When sampled continuously with an IMD-W system, the water generation process can be fully mapped out and understood, helping to support critical systems maintenance programs, filter changeout scheduling, and quality decisions related to the water.
Water System Validation Validation of a purified water system typically is performed upon installation of the line, or when there are modifications to it. Every sample site is sampled, each day, for a period of a month or so during validation. This is a very work-intensive process using traditional methods, requiring those involved to wait each day for updated results from the past several days, and then to make adjustments to the line until counts are right. By using an IMD-W system, this iterative adjustment process can be greatly accelerated as a result of IMD-W’s instantaneous microbial feedback on each water sample collected.
Routine Water Sampling After water system validation has been completed, it is possible to reduce sampling requirements based upon schemes to monitor Critical Control Points (CCP) or through risk analyses of the validation data. In this situation, an online IMD-W system installed at each CCP can deliver continuous monitoring capability. Generated data can be sent to a central location and monitored remotely, much like data from online conductivity and TOC analyzers are managed. In this way, the IMD-W system can accelerate actions to mitigate risk and reduce investigation costs, driven by data collected in real time while offering a means to enhance process understanding.
|Detection Method||Optical, Mie Scatter (particle detection) Optical, Auto-ﬂuorescence (biologic status)|
|Detectors||(1) Photodiode, (2) PMTs|
|Minimum Detection Size||≥ 0.3 µm|
|Detection Limit||1 Bio-count|
|Measurement Mode||Continuous or At-line sampling for speciﬁed time or volume|
|Flow Rate||10 mL/min (Water Flow Rate), 5 mL/min (Measured Flow Rate)|
|Water Temperature||0 to 65°C (32 to 150° F) higher temperatures when operated with external cooling solution|
|Water Pressure||69 kPa to 690 kPa (10 psid to 100 psig)|
|User Interface||20.3-cm (8.0-inch) LCD touchscreen|
|Connectivity||10/100/1000 Base-T LAN, USB|
|Power Requirements||100-240 VAC, +10%/-15%, 1.0A, 50-60 Hz|
|Power Consumption||60 Watts, max.|
|Vibration/shock||.25 G, 5-300 Hz (1.0 G shipping)|
|Mounting Options||Wall, Rack, or Benchtop|
|Enclosure Material / Rating||Type 4 16-gauge mild steel, powder-coat ﬁnish /IP32|
|Dimensions||W: 47 x H: 46.4 x D: 31.75 cm. (W: 18.5 x H: 18.25 x D: 12.5 in.)|
|Weight||26 kg (57 lbs)|
Keep up on our always evolving product features and technology. Enter your e-mail and subscribe to our newsletter
2005 W. Ruthrauff Road, Suite 151
Tucson, AZ 85705 USA